Installation Method: Stud Mounting
This method is the most popular and secure
method available. Installation patterns
available and highly recommended for easy
install. Simply drill holes, fill with 100% pure
silicone and slide in letters. Studs are randomly
placed, patterns are needed for each set of
letters ordered

Available for:
Plastic Letters
Acrylic Letters
Brass Letters
Bronze Letters
Aluminum Letters
Cast Letters
Channel Letters
Copper Letters
Minnesota Letters
Stainless Steel Letters
Mini Metal Letters

(Stud on Flat Cut Metal Letter)

Click here to view text & picture demonstration

Click here to view video demonstration
(23.88mb)

Installation Method: Stud Pad Combination
Great for corrugated buildings or walls. This
installation method combines studs and pads
to leave the letter across uneven surfaces.
Installation patters are Available and highly
recommended for this installation method.
Simply apply the pattern to cardboard and
level against the wall. Then drill where the
studs are marked, adjust pads and studs to
fit the wall appropriately, fill holes with
100% pure silicone and apply the letters.
Studs are randomly placed, patterns are
needed for each set of letters ordered

Available for:
Plastic Letters
Acrylic Letters
Minnesota Letters

(Studs Come On All Pads)

Click here to view text & picture demonstration

Click here to view video demonstration
(24.97mb)

Installation Method: Stud for Brick
Stud for brick is a great option to choose
for brick applications. Studs are placed
behind the letters to line up with the mortar
joints of the brick wall. Installation patterns
are available and highly recommended for
this installation method. This Method is only
available for standard brick with mortar joints
at 2 5/8'' on center. Studs are randomly placed,
patterns are needed for each set of letters
ordered

Available for:
Plastic Letters
Acrylic Letters
Aluminum Letters
Brass Letters
Bronze Letters
Cast Letters
Copper Letters
Minnesota Letters
Stainless Steel Letters

(Installation Pattern On A Standard Size Brick Wall)

Click here to view text & picture demonstration

Click here to view video demonstration
(6.61mb)

Installation Method: Spacing Tape
Easy installation method to assist you
with pad mounting and letters with no
mounting hardware. Simply level tape,
stick it to the wall, use 100% pure silicone
adhesive on the back of the pads or
letters and place between marked out
lines on spacing tape.

Available for:
Plastic Letters
Acrylic Letters
Aluminum Letters
Brass Letters
Bronze Letters
Channel Letters
Copper Letters
Minnesota Letters
Stainless Steel Letters
Mini Metal Letters

Installation Method: Changeable Letters
Changeable letter track is easy to install. Simply
Drill oblong holes approx. 8" apart and use stainless
steel screws or rivets to attach the track to the
sign. Do not tighten the screws leave approx.
1/4 to a 1/2 turn loose so that the sign has room
to expand and contract with temperature changes.

Available for:
Changeable Letters

Installation Method: Stud Mount with Spacers
Stud mount with spacers will give you the
stand your letters off the wall either 1/4'',
1/2'' or 3/4''. The spacers are sleeves that
go around the stud not allowing the letter
to go any deeper into the wall. This is an
even and easy to use method to stand your
letters off the wall. Use Stud mount with
nuts for corrugated mounting surfaces.
Studs are randomly placed, patterns are
needed for each set of letters ordered

Available for:
Acrylic Letters
Aluminum Letters
Brass Letters
Bronze Letters
Copper Letters
Stainless Steel Letters
Cast Aluminum Letters
Cast Bronze Letters

Installation Method: Stud Mount Inline
Stud mount inline is a great method if you are
planning on building a back rail mounting system.
This will place all the studs in even rows so
that you can mount them to rails or bars.
Studs are randomly placed, patterns are
needed for each set of letters ordered

Available for:
Acrylic Letters
Aluminum Letters
Brass Letters
Bronze Letters
Copper Letters
Stainless Steel Letters